2.5W Audio Amplifier with Transistors

 Posted by:   Posted on:    No comments

This amplifier is easy to build using common discrete parts. A channel uses only four general purpose transistors (3 NPN like BC547, 2N2222, 2N3904 and 1 PNP like BC557, 2N2907, 2N3906) and two medium power complementary transistors like BD135/137/139 with BD 136/138/140 or MJE200 with MJE210. Almost any pair of complementary transistors will do as long as hFE is greater than 60, maximum collector current at least 1 A and dissipation at least 10 W.

The power transistors must be fitted on a heatsink! They have their collectors electrically connected so you don't have to isolate each other. The heatsink should have an area of at least 40 square centimeters. Note that the heatsink voltage is neither ground or supply voltage so do not connect it with anything else besides transistors. Be careful not to connect it with chassis ground. If you build the other channel for stereo use, do not electrically connect the heatsinks of both left and right channels.


2.5W Audio Amplifier with Transistors